C2FT S1 Slow Set Flex Grey wall & floor 20 kg Adhesive

PREPARATION of your Adhesive

 All installations should be carried out in accordance with BS 5385. All surfaces must be clean, firm, dry, free 

from all loose matter including dust, dirt, oil, grease, laitance and any other contaminants that may affect 

adhesion. All substrates should be prepared to provide a rigid and secure base without deflection and suitable 

to support the intended weight. New timber should be given time to find equilibrium with its surroundings.

 The following information provides further details for preparing various common substrates. Unless stated 

otherwise, any reference to the term “diluted” means 1 part primer mixed with 1 part clean water. N.B. All 

primer applications should be fully dry before next works commence.

 Anhydrite Screeds - The substrate must not leach moisture. Anhydrite screeds must not have a moisture 

content greater than 0.5% or 75% relative humidity (RH). This can easily be tested by taking moisture readings 

across the whole surface. It is essential that surface laitance is removed in accordance with the screed 

manufacturer’s recommendations, followed by vacuum cleaning to remove any loose material, then apply 1 

diluted coat of ROCATEX Acrylic Primer followed by a minimum of 2 neat coats or 2 diluted coats of ROCATEX